7
8
9
10 Click the Routers tab.
11 Enter the Default Router IP Address.
12 Click the OK button.
13 Connect a workstation that is connected to the Management LAN to the RMX's LAN 3
14 In the Reset Confirmation dialog box, click Yes.
System restart may take up to five minutes.
15 On the workstation that was connected to the RMX in Step 13, start the RMX Web Client
16 Connect to the RMX. See "Connecting to the RMX" on page 1-42.
Polycom, Inc.
In the RMX Management pane, click the IP Network Services (
In the IP Network Services list pane, right-click the Management Network (
and select Properties.
Enter the Control Unit IP, Shelf Management IP and Subnet Mask addresses in their
respective field boxes.
A Reset Confirmation dialog box is displayed.
port.
application:
In the browser's address line, enter the Control Unit IP Address in the format:
a
https://<Control Unit IP Address>
Press Enter.
b
Chapter 1-First Time Installation and Configuration
) button.
.
) entry
1-57
Need help?
Do you have a question about the 1500 and is the answer not in the manual?
Questions and answers