Switching To Secure Communication Mode - Polycom 1500 Deployment Manual

Switching to Secure Communication Mode

After the SSL/TLS certificate is installed, secure communications are enabled by modifying
the properties of the Management Network in the Management Network properties dialog box.
When Secure Communications Mode is enabled:
•
•
•
•
To enable secure communications mode:
1
2
3
4
5
6
System restart may take up to five minutes.
Refresh the browser periodically until the RMX Web Client – Terms of Usage screen is
displayed
Polycom, Inc.
Only https:// commands from the browser to the Control Unit IP Address of the
RMX are accepted.
The RMX listens only on secured port 443.
All connection attempts on port 80 are rejected.
A secure communication indicator ( ) is displayed in the browser's status bar.
In the RMX Management pane, click IP Network Services.
In the IP Network Services list pane, double click the Management Network entry.
The Management Network Properties dialog box is displayed.
Select the Secured RMX Communication check box.
Click OK.
In the Reset Confirmation dialog box, click Yes.
In the Please wait for system reset message box, click OK.
Chapter 1-First Time Installation and Configuration
1-51