Polycom 1500 Deployment Manual page 86

Polycom RealPresence Collaboration Server (RMX)1500/2000/4000 Deployment Guide for Maximum Security Environments
2-14
Table 2-2 New Conference – General Options (Continued)
Field
Routing Name
Profile
ID
Conference Password
Chairperson Password
Description
Routing Name is the name with which ongoing conferences,
Meeting Rooms and Entry Queues register with various devices on
the network such as gatekeepers. This name must defined using
ASCII characters.
Comma, colon and semicolon characters cannot be used in
the Routing Name.
The Routing Name can be defined by the user or automatically
generated by the system if no Routing Name is entered as follows:
•
If ASCII characters are entered as the Display Name, it is used
also as the Routing Name
•
If a combination of Unicode and ASCII characters (or full
Unicode text) is entered as the Display Name, the ID (such as
Conference ID) is used as the Routing Name.
If the same name is already used by another conference, Meeting
Room or Entry Queue, the RMX displays an error message and
requests that you to enter a different name.
The system displays the name of the default Conference Profile.
Select the required Profile from the list.
The Conference Profile includes the Conference line rate, media
settings and general settings.
Note: Only AVC based profiles are supported in a Maximum
Security Deployment.
For a detailed description of Conference Profiles, see the
RealPresence Collaboration Server (RMX) 1500/2000/4000
Administrator's Guide, "Conference Profiles" on page 1-1.
Enter the unique-per-MCU conference ID. If left blank, the MCU
automatically assigns a number once the conference is launched.
This ID must be communicated to conference participants to
enable them to dial in to the conference.
Enter a password to be used by
participants to access the conference.
If left blank, no password is assigned to
the conference.
This password is valid only in
conferences that are configured to
prompt for a conference password.
Enter a password to be used by the
RMX to identify the Chairperson and
grant him/her additional privileges. If
left blank, no chairperson password is
assigned to the conference.
This password is valid only in confer-
ences that are configured to prompt for
a chairperson password.
These fields are
numeric and have a
default length of 4
characters. The
administrator can
modify them in the
Setup - System
Configuration settings.
For more information,
see RealPresence
Collaboration Server
(RMX) 1500/2000/4000
Administrator's Guide,
"System Configuration"
on page 14-22.
Polycom, Inc.