Polycom 1500 Deployment Manual page 132

Polycom RealPresence Collaboration Server (RMX)1500/2000/4000 Deployment Guide for Maximum Security Environments
Step 3: Connect the RMX to the Workstation
The Alternate Management Network enables direct access to the RMX for support purposes.
The Alternate Management Network cannot be configured and operates according to factory
defaults.
Access to the Alternate Management Network is via a cable connected to a workstation. The
Alternate Management Network is accessible only via the LAN 3 port on the RMX 2000, the
Modem port on the RMX 1500 and LAN 1 port on the RMX 4000.
RMX 1500
RMX 2000
RMX 4000
>>
Step 4: Insert a USB key containing a file named RestoreToFactoryDefault.txt and a
lan.cfg file into the USB port of the RMX
The USB port locations for RMX 1500/2000/4000 are shown in "There are also administrative
operations that cannot be performed on a secured or ultra secured system that require the RMX to be
set back to its default (normal) security mode." on page 4-1.
Step 5: Power the RMX Off and then On.
4-8
LAN 3 Port
LAN 1 Port
Connect the cable between the RMX port and the LAN port configured on the
workstation.
Modem Port
Polycom, Inc.