Cleaning the service station
If ink and dust accumulate in the service station, poor print quality may result.
The recommended frequency for cleaning the service station is weekly.
However, the actual frequency depends on the amount of use.
To clean the service station
Select
1
Utility/Access Cartridges
station.
Raise the printer cover.
2
Locate the service station release tab at the right end of the service station base.
3
Move it gently to the left and lift to remove the entire service station assembly.
4
Wiper
[27] Cleaning the service station
Rinse the service station and wipers with warm water. Use cotton swabs to
5
clean small spaces.
Printer maintenance and storage
to move the carriage away from the service
Seal
Tab
81