Selecting The Palette; Setting The "Control" Function - Oce CS 5050 User Manual

Selecting the palette

The "Palette select" option lets you choose either the HP-GL/2 or AutoCAD
palette. Each palette allows 256 colours with 8 predefined colours, as shown
below:
Pen number
0
1
2
3
4
5
6
7
To choose a palette
From the main menu, press
1
Choose either HP-GL/2 or AutoCAD.
2
Press
3 OK

Setting the "Control" function

Set the control to establish whether it is the software application or the printer
control panel that determine certain printing functions. Control overrides the
following functions in the HP-GL/2 header file:
"Repeat Plot" (RP): when you set control to the printer, the printer will
ignore RP commands in the print file and make only one print. On the
control panel you can use the "HP-GL/2/Reprints" menu to specify
additional copies.
"Enable Auto Cutter" (EC): when you set control to the printer, the printer
will ignore EC commands in the print file, and will not automatically cut
after each print. On the control panel, you can enable automatic cutting or
initiate a command for a single cut.
Printing with HP-GL/2
HP-GL/2
White
Black
Red
Green
Yellow
Blue
Magenta
Cyan
.
AutoCAD
White
Red
Yellow
Green
Cyan
Blue
Magenta
Black
/
Setup menu HP-GL/2 menu/Palette select
.
67