Oce CS 5050 User Manual page 31

Remove the blue tape from the cartridge jet plate.
7
Do not raise the cartridge 30 degrees above electronics cover or turn
Note:
the cartridge upside-down during the tape removal or priming process.
[14] Removing the blue tape from the cartridge jet plate
Attach the Prime tool to the cartridge jet plate and prime cartridge with pulses
8
by pressing the activation button repeatedly.
A helpful method is to break the seal with the jet plate after each
Note:
pulse to improve the priming success rate.
[15] Attaching the Prime tool to the cartridge jet plate
Getting started 31