Filling The Ink Reservoirs - Oce CS 5050 User Manual

Filling the ink reservoirs

The Océ CS 5050/5070 can handle long, uninterrupted print jobs because each
of its four reservoirs holds 500 ml of ink. The ink reservoirs are located at the
printer's left side. Use Océ inks for best results.
When running at carriage speeds faster than the default, the ink levels in
Note:
the reservoirs should be no more than 300 ml.
[7] Filling the ink reservoirs
To place the ink reservoirs in the right order, see the sticker on the
Note:
carriage. Observe the ink order from left to right as follows: yellow, magenta,
cyan, black.
To fill the ink reservoirs
Open the cover on the left side of the printer to access the ink reservoirs.
1
Unscrew the cap of one reservoir.
Open only one reservoir at a time to prevent mixing with other ink
Note:
colours.
Remove cap from the bottle.
2
Make sure that you are using the same type of ink in all the reservoirs and
3
cartridges.
Fill the reservoir up to 375 ml, or no more than 1/2 inch (about 1.2 cm) from
4
the top of the reservoir.
Make sure that there is no excess ink on the reservoir cap.
5
Replace the cap on the reservoir.
6
Getting started 25