Using The Media Counter - Oce CS 5050 User Manual

To set the "Feeder stop"
Press
1 Feed Media
Choose
2
Press
3 OK

Using the media counter

The media counter gives you a means of "estimating" the length of media left
on a roll.
When you install a new roll (or used roll of media with a known length), you
enter the length in the media counter on the control panel.
As the printer uses up the media, this value decreases and displays on the
control panel.
When you remove the media roll, you can print the estimated remaining
length on the roll, and enter this value in the media counter the next time you
use this roll.
To enter a media length value
Press
1 Feed Media
Enter the media length.
2
Press
3 OK
To display the media length value
Press
1 Feed Media
Press
2 Exit
To print the media length value on the roll
Press
1 Feed Media
Press
2 Print counter
Press
3 Exit
To reset the media counter to 0
Press
1 Feed Media
Press
2 Reset counter
Press
3 OK
52 Océ CS 5050/5070 User Manual
/
End of Media
.
Feeder Stop
.
/
Media counter
.
/
Display counter
.
/
Display counter
.
.
/
Media counter
.
.
.
.
. The current value appears.
.
.