Cleaning Developer Station Surface - Oce VarioStream 9000 User Manual

Cleaning developer station surface

[12]
[49]
[50]
[51]
[13]
Roller
[53]
[14]
Toner, developer
[54]
[15]
Developer station
[55]
[56]
Scratching
Explosion
Collision, damage If several developer stations are installed, they
Burns
Cleaning developer station surface
[52]
When vacuuming the toner, do not scratch the
roller. For this purpose, use a plastic or rubber
attachment.
Always use an industrial vacuum cleaner with a
grounded suction tube, rubber nozzle and filter
set for fine dust. For larger quantities, the
industrial vacuum cleaner must be
explosion-proof.
must be swivelled on or off in the correct order.
The motor cover of developer stations can be
hot. Burns can result from touching these
components. Allow the developer station to cool
down and wear heat-resistant protective gloves.
23