Turning On The Dryer; Setting The Dry Time; Adjusting The Lcd Contrast - Oce CS 5050 User Manual

Turning on the dryer

The dryer is installed at the base of the printer stand and is designed to dry the
ink. When activated, the dryer fans turn on at the beginning of a print and stay
on for 10 minutes unless you set a specific dry time.
To turn on the dryer
Press
1 Setup/Ink Option/Dryer
Choose
2
Press
3 OK

Setting the dry time

Unattended prints require drying time to prevent the ink from smearing when
the image touches the take-up roll or previously printed images. Different
media can require different drying time depending on the ambient temperature
and humidity. Dry time values range from 10 seconds to 60 minutes. When this
time expires, the printer rolls or cuts the image before printing the next image
in the buffer.
To set the dry time
Press
1 Setup/Ink Option/Dry Time
Choose a time from 10 seconds to 60 minutes.
2
Press
3 OK

Adjusting the LCD contrast

The LCD contrast option lets you adjust the brightness of the control panel
(with default setting 9). The contrast values range from 1-16, with 16 as the
least contrast.
To set LCD contrast
Press
1 Setup/User Setup/LCD Contrast
Choose the contrast value.
2
Press
3 OK
Printing options
.
On
.
.
.
.
.
.
63