Maintaining The Océ Prime Tool - Oce CS 5050 User Manual

Maintaining the Océ Prime tool
The Océ Prime tool is an accessory used to establish ink flow when you install
new cartridges and reservoirs. It operates using four (4) AA batteries.
To replace the battery
Remove the screw at the end of the unit and open the Océ Prime tool.
1
Note the orientation of the battery pack.
2
Remove old batteries and replace with new batteries.
3
To clean the Océ Prime tool
Clean the Océ Prime tool (part that touches the cartridge) with distilled water
1
and a lint-free cloth to remove ink.
Thoroughly wash the ink bottle and allow to air dry.
2
86 Océ CS 5050/5070 User Manual