To choose print quality
Press
1
Setup/Print Mode/Quality Mode
Choose the print quality.
2
Press
3
OK
Setting the number of print passes
The number of passes indicates how many times the cartridges must fire to lay
down the ink for a complete scan line. When you choose multiple passes, the
jets fire a fraction of the dots on each pass. The result is less ink in each pass.
If you're printing an image with heavy fill or shading, setting the print mode to
an option that lays down less ink (e.g., three pass) can help prevent running and
bleeding.
The 10-pass print mode can handle difficult print jobs that involve high
contrast solid fills and blends. This mode can give higher output quality from
older cartridges, hence extending the life of your cartridges.
To change the number of passes
Choose
1
Choose
2
Press
3
OK
Setting the carriage speed
The carriage speed determines the number of dots that print (per second) as the
carriage moves over the media.
To set the carriage speed
Press
1
Setup/Print Mode/Carriage speed.
Choose the speed from
2
Press
3
OK
Printing options
.
Setup/Print Mode/Print Passes
,
,
,
single
two
three
four
.
to
1
.
.
.
,
or
six, eight,
ten
.
10
passes.
49