Choosing Paper Options; Media Standards - Oce CS 5050 User Manual

Choosing paper options

The following paper options are available:
Supply Type
Margins

Media standards

When you print an image, you determine its size from the software application.
Make sure that you have loaded a media wide enough to accommodate the
image size; the printer automatically defines the print area based on the width
of the loaded media. If length is a problem, use roll media. If the media width
is smaller than the image size, the image may be truncated.
To choose the media standard
Press
1 Setup/Paper Option/Media Standard
Choose the size of media you are loading.
2
Press
3 OK
54 Océ CS 5050/5070 User Manual
.
Save Media
Auto-Load Delay
.
Auto-Wipe
Auto-Cut