Error Handling; Unrecognised Cartridge - Oce CS 5050 User Manual

Error handling

In case of an error, the control panel displays the 'Internal ERROR: Shutdown'
message, followed by a specific message that explains the nature of the error.
If you cannot clear it, note the message and the sequence of events leading to
the error, in order for Océ technical support personnel to assist you in solving
the problem.
If the control panel displays a "Servo shutdown message", turn the printer off
and on again to clear the error.
If the control panel displays an "Unrecognised Cartridge(s)" message, the error
originates from one of three problems:
One or more non-CS 5050/5070 cartridges installed
One or more incorrectly installed Océ cartridges
One or more cartridges not installed

Unrecognised cartridge

If you use cartridges other than Océ cartridges, the "unrecognised cartridge"
message appears. Also, incorrectly installed cartridges lead to the same error
message due to poor electrical connections between the cartridge and the
carriage unit.
To clear the error
Press
1 Access Cartridges
of the ink cartridges.
Check for the correct installation of CS 5050/5070 cartridges in each position.
2
Replace any non-standard cartridge with an Océ cartridge.
3
Press
4 OK
The printer can sometimes display a cartridge error even with an Océ
Note:
cartridge. This may be due to a build-up of static electricity. Turn off the
printer and unplug it from the outlet. Wait 10 seconds before you plug it back
in and turn on the printer.
90 Océ CS 5050/5070 User Manual
to move the carriage to the position for replacement
.