Compensating For Electrically Defective Jets; Clearing Clogged Jets - Oce CS 5050 User Manual

Compensating for electrically defective jets

To compensate for electrically defective jets
Examine the printed test pattern.
1
Each solid bar represents an electrically defective jet. The header indicates the
print mode that can best compensate for the defective jets in each cartridge.
The same print mode must be available for all four print cartridges in order to
provide full compensation.
Press
2 Setup Menu
Set the number of print passes by pressing the
3
the appropriate setting.
When printing to the Océ CS 5050/5070 using the Océ Graphics
Note:
Server L, you should set the correct print mode in the Setup window of the
Printer Setup dialog box (consult your Océ Graphics Server L Reference
Manual).
Press
4 OK
Press
5 Exit
If the detection of a failed jet appears to be inconsistent (i.e. failed jet
Note:
moves from one position to another between primes), you should clean the
electrical contacts on the flex driver cable (located behind each cartridge) and
the cartridge electrical contacts using a lint-free cloth moistened with
isopropyl alcohol. Make sure that the unit is powered off while cleaning the
flex driver cables.

clearing clogged jets

A clogged jet appears in the prime pattern as a gap in the "stair-step pattern"
for each cartridge. The printer does not automatically detect clogged jets, so
you must clear them manually by cleaning and priming the cartridges.
To clear clogged jets
Examine the printed test pattern.
1
Unsnap the ink cartridge which shows clogged jets from the carriage.
2
Prime the cartridge using the prime tool. To do so, attach the prime tool to the
3
cartridge jet plate and prime the cartridge by pressing the activation button
repeatedly.
Clean the cartridge jet plate by blotting the jet plate with a distilled
4
water/isopropyl saturated lint-free towel.
Error handling and troubleshooting
/
Print Mode Menu
.
to leave the menu.
/ .
Print Passes
Prev. Option
or to
Next Option
93