Installing New Cartridges; Refilling Ink Cartridges - Oce CS 5050 User Manual

Installing new cartridges

Be sure the new cartridges you install contain the same type of ink as the
reservoirs. Snap them into place and attach the quick-connect fittings.
Each time you place new ink cartridges in the printer, prime and calibrate them
to get the highest quality printed images.
Attention:
carriage without first selecting Utility/Access Cartridges to move the
carriage away from the service station. Do not attempt to pull the carriage
out of the service station manually while the printer is turned on.

Refilling ink cartridges

New Océ cartridges are pre-filled with ink. However, if you must re-install a
used or empty cartridge, make sure that the ink level in the cartridge is exactly
20 ml. Any other level (above or below 20 ml) can interfere with the
continuous ink refilling process to the cartridges during printing.
To refill a used cartridge with the correct level of ink, use the syringe and hose
provided. The hose length of the syringe is 40 mm.
This 40 mm length guarantees the correct amount of ink when you insert
Note:
the hose completely into the cartridge.
To fill an empty cartridge
Fill the syringe with 20 ml of ink.
1
Attach the hose to the syringe.
2
Insert the hose into the cartridge.
3
Empty the syringe contents into the cartridge.
4
To draw excess ink from a cartridge
Insert the hose of the empty syringe into the cartridge.
1
Draw excess ink from cartridge. The level of remaining ink is now exactly 20
2
ml.
Remove the syringe.
3
Printer maintenance and storage
Do not attempt to install or remove an ink cartridge from the
75