Saving Media; Selecting Auto-Wipe; Applying Ink Reduction - Oce CS 5050 User Manual

To set auto-cut
Press
1 Setup/Paper Option/Auto-Cu
Choose
2
Press
3 OK

Saving media

With the
enough to print the image. When not activated, the printer advances the full
print area of the loaded media. For example, if a 36 inch roll is loaded, the
printer advances the entire print area for a standard 36 x 48" sheet, even if the
printed image is only 30 inches long.
To turn off Save Media
Press
1 Setup/Paper Option/Save Media
Choose
2
Press
3 OK

Selecting auto-wipe

The printer automatically wipes the cartridge jet plates periodically during
printing (by default). However, you can de-activate this setting if you are
having problems with banding.
Not wiping the cartridge jet plates can cause inkjet clogging.
Note:
To turn off the wiper
Press
1 Setup/Paper Option/Auto-Wipe
Choose
2
Press
3 OK

Applying ink reduction

Ink reduction lets you reduce the percentage of ink laid down by the printer.
This option applies to vector-based images only, and has no effect on
continuous tone (raster) images. This is useful for images with large amounts
of printed area, and limits bleeding or over-saturation of the media. However,
Printing options
or .
On Off
.
option activated (by default), the media advances only far
Save media
.
Off
.
.
Off
.
t.
.
.
61