Replacement Routines; Preparations; Removing A Primergy Cx122 S1 Server From The System Unit - Fujitsu PRIMERGY CX122 S1 Service Supplement Manual

4

Replacement routines

V
CAUTION!
Observe the safety instructions in the
4.1

Preparations

4.1.1 Removing a PRIMERGY CX122 S1 server from the
system unit
I
A defective PRIMERGY CX122 S1 server is maintained by Fujitsu
service technicians. The warranty is void if the server is damaged during
installation or replacement of system expansions.
Figure 2: Front panel On/Off button and power-on indicator
Ê Shut down the server properly.
The power-on indicator (2) turns off.
I
If the server does not shut down completely, press the On/Off button
(1) for at least four seconds and/or send a corresponding control
signal for power button override.
PRIMERGY CX122 S1
chapter "Safety notes" on page
Service Supplement
11.
19