Configurable Pin Settings - Lantronix XPort Direct+ User Manual

Re-notification Interval
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.

Configurable Pin Settings

There are three configurable hardware pins on the XPort Direct+ unit. For each pin,
configure the pin function, communication direction, and activity level. For more
information, see
To configure the XPort Direct+'s Configurable Pins:
1. On the main menu, click Configurable Pins. The Configurable Pins page opens.
2. Configure or modify the following fields for each pin:
Function
Direction
Active Level
Configurable Pin Functions
General Purpose I/O
Modem Ctrl In
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
XPort Direct+ User Guide
Indicates the time interval in which a new email message is
sent to the recipient(s) when a single trigger event remains
active.
9: GPIO Interface.
Figure 4-11. Configurable Pins Settings
From the drop-down menu, select the purpose of the specified
pin. See Configurable Pin Functions
of each available function.
Select whether the pin inputs or outputs.
Select the signal active level (Low or High).
Monitors input using the 77F0 port or controls output by the
77F0 port.
Allows for control of the connection (and disconnection) of
channel 1.
4: Configuration Using Web Manager
(below) for a description
32