8: Setup Mode: Advanced Settings; Email Settings (Option 3) - Lantronix XPort Direct+ User Manual

8: Setup Mode: Advanced Settings

Email Settings (Option 3)

Note:
Web-Manager. To configure email settings using DeviceInstaller, see Email
Notification in the DeviceInstaller online Help.
The unit sends an email to multiple recipients when a specific trigger event occurs.
There are three separate triggers, based on any combination of the configurable pins
(PIO) when selected as user I/O functions. Optionally, use a two-byte serial string to
initiate a trigger.
To configure email configuration settings, select Email (option 3) from the Change
Setup menu.
XPort Direct+ User Guide
You can change these settings using Telnet, a serial connection, or
Figure 8-1. Email Settings
*** E-mail
Mail server: 0.0.0.0
Unit :
Domain :
Recipient 1:
Recipient 2:
- Trigger 1
Serial trigger input: disabled
Channel: 1
Match: 00
Trigger input1: X
Trigger input2: X
Trigger input3: X
Message :
Priority: L
Min. notification interval: 1 s
Re-notification interval
- Trigger 2
Serial trigger input: disabled
Channel: 1
Match: 00
Trigger input1: X
Trigger input2: X
Trigger input3: X
Message :
Priority: L
Min. notification interval: 1 s
Re-notification interval
- Trigger 3
Serial trigger input: disabled
Channel: 2
Match: 00
Trigger input1: X
: 0 s
: 0 s
54