Disable Web Setup; Disable Echo Ports; Enable Enhanced Password; Disable Port 77F0 (Hex) - Lantronix XPort Direct+ User Manual

Disable Web Server (N) ? _

Disable Web Setup

The Y (Yes) option disables configuration using the Web-Manager. This setting
defaults to the N (option).
Disable Web Setup (N) ? _

Disable ECHO Ports

This setting controls whether port 7 echoes characters it receives.
Disable ECHO ports (Y) ? _

Enable Enhanced Password

This setting defaults to the N (No) option, which allows you to set a 4-character
password that protects Setup Mode by means of Telnet and web pages. The Y (Yes)
option allows you to set an extended security password of 16-characters for
protecting Telnet and Web Page access.
Enable Enhanced Password (Y) ? _

Disable Port 77F0 (Hex)

Port 77F0 is a setting that allows a custom application to query or set the three XPort
Direct+ configurable pins when they are functioning as general purpose I/O (GPIO).
You may want to disable this capability for security purposes. The default setting is
the N (No) option, which enables GPIO control. The Y (Yes) option disables the
GPIO control interface.
Disable Port 77F0h ? _

Default Settings (Option 7)

Select 7 to reset the unit's Channel 1 configuration, email settings, and expert
settings to the default settings. The server configuration settings for IP address,
gateway IP address, and netmask remain unchanged. The configurable pins' settings
also remain unchanged. The specific settings that this option changes are listed
below:

Channel 1 Configuration Defaults

Baudrate
I/F Mode
Flow
Port number
XPort Direct+ User Guide
8: Setup Mode: Advanced Settings
9600
4C (1 stop bit, no parity, 8 bit, RS-232C)
00
10001
61