Lantronix XPort Direct+ User Manual page 18

Note: Alternatively, to open Web-Manager, open your web browser and
enter the IP address of the XPort Direct+. (With firmware 1.8 or earlier, your
browser must be JAVA-enabled to use Web-Manager. With firmware 6.1.0.0
and later, your web browser does not need to be JAVA-enabled.)
The XPort Direct+ prompts for a User name and Password.
8. Perform one of the following:
If no Telnet password has been defined (default), leave both fields blank and
click OK.
If a Telnet password has been defined, leave the username blank, type in the
password, and then click OK.
The Web-Manager displays.
The main menu is in the left pane of the Web-Manager window.
XPort Direct+ User Guide
Figure 4-1. Web-Manager Login Window
Figure 4-2. Lantronix Web-Manager
4: Configuration Using Web Manager
18