Ethernet Connection Type; Security Settings (Option 6); Disable Snmp - Lantronix XPort Direct+ User Manual

If necessary, enable the alternate MAC address (if specified in the OEM setup
record).
Enable alternate MAC (N) ? _

Ethernet Connection Type

The XPort Direct+ allows for the Ethernet speed and duplex to be manually
configured. Enter 0 for auto-negotiation (default). To select the speed and duplex,
enter one of the following: 2 (10Mbit/half duplex), 3 (10Mbit/full duplex), 4
(100Mbit/half duplex), or 5 (100Mbit/full duplex).
Ethernet connection type: (0) ? _

Security Settings (Option 6)

You can change security settings by means of Telnet or serial connections only, not
on the Web-Manager. We recommend that you set security over the dedicated
network or over the serial setup to prevent eavesdropping.
Caution:
accessing the setup menu from the network. Disabling Port 77FE also
disables the Web from configuring the device.
Select 7 to configure security settings.

Disable SNMP

This setting allows you to disable the SNMP protocol on the unit for security reasons.
Disable SNMP (N) ? _
XPort Direct+ User Guide
Disabling both Telnet Setup and Port 77FE will prevent users from
Figure 8-3. Security Settings
8: Setup Mode: Advanced Settings
59