Configuration Methods - Lantronix XPort Direct+ User Manual

2: Introduction

Configuration Methods

For the unit to operate correctly on a network, it must have a unique IP address on
the network. There are three basic methods for logging into the device server to
assign an IP address and configure the unit:
DeviceInstaller: Assign an IP address and view the current XPort Direct+
configuration using a Graphical User Interface (GUI) on a PC attached to a network.
(See 3: Using DeviceInstaller.)
Web-Manager: Through a web interface, configure the XPort Direct+ and its settings
using the XPort Direct+ Web-Manager. (See 4: Configuration Using Web Manager.)
Serial & Telnet Ports: There are two approaches to accessing Serial Mode. Make a
Telnet connection to the network port (9999) or connect a terminal (or a PC running a
terminal emulation program) to the unit's serial port. (See 5: Configuration via Telnet
or Serial Port (Setup Mode) )
XPort Direct+ User Guide 12