1: About This Guide; Purpose And Audience; Chapter Summary - Lantronix XPort Direct+ User Manual

1: About This Guide

Purpose and Audience

This guide covers the Lantronix XPort Direct+. It provides the information needed to
configure, use, and update the XPort Direct+ firmware and is for OEMs and system
integrators who are embedding the XPort Direct+ in their product designs.

Chapter Summary

The remaining chapters in this guide include:
2: Introduction
3: Using DeviceInstaller
4: Configuration Using Web
Manager
5: Configuration via Telnet or
Serial Port (Setup Mode)
6: Setup Mode: Server
Configuration
7: Setup Mode: Channel
Configuration
8: Setup Mode: Advanced
Settings
9: GPIO Interface
10: Firmware Upgrades
11: Monitor Mode
12: Troubleshooting
A: Binary to Hexadecimal
Conversions
XPort Direct+ User Guide
Describes the main features of the XPort Direct+ and the
protocols it supports.
Provides information for getting your unit up and running,
using DeviceInstaller to assign an IP address.
Details using the Web-Manager to set parameters such
as port and server properties.
Provides instructions for accessing Setup Mode
(command line interface) using a Telnet connection
through the network or a terminal or terminal emulation
program through the serial port.
Details the network (server) settings
Details the serial port settings.
Details email, expert, and security settings and explains
how to reset the unit to factory default values.
Provides instructions for configuring the three General
Purpose I/O pins (CP1-3).
Provides instructions for obtaining the latest firmware and
updating the XPort Direct+.
Provides instructions for accessing and using the
command line interface for monitoring the network and
diagnosing problems.
Describes common problems and error messages and
how to contact Lantronix Technical Support.
Provides instructions for converting binary numbers to
hexadecimals.
8