Table of Contents
Advertisement
The default settings are listed below:
TCP Keepalive time in s
(1s – 65s; 0s=disable)
ARP Cache timeout in s
(1s – 600s)
CPU Performance
Monitor Mode @ bootup
HTTP Port Number
(1-65535)
SMTP Port Number
(1-65535)
MTU Size (512 – 1400)
Enable alternate MAC
Ethernet connection type
TCP Keepalive time in seconds
This option allows you to change how many seconds the unit waits during a silent
connection before attempting to see if the currently connected network device is still
on the network. If the unit gets no response, it drops that connection.
TCP Keepalive time in s (1s – 65s; 0s=disable): (45)? _
ARP Cache timeout in seconds
Whenever the unit communicates with another device on the network, it adds an
entry into its ARP table. The ARP Cache timeout option allows you to define how
many seconds (1-600) the unit will wait before timing out this table.
ARP Cache timeout in s (1s – 65s; 0s=disable): (600)? _
CPU Performance
XPort Direct+ User Guide
Figure 8-2. Expert Settings
45
600
Regular
Enabled
80
25
0 (resulting in an operational value of 1400)
No (OEM use only)
0 (resulting in auto-negotiation)
8: Setup Mode: Advanced Settings
57
Advertisement
Table of Contents
