P/N: 500-103 RJ45-DB9F serial cable • Accessory Din-rail wall mount bracket The supplied Lantronix P/N: 500-103 serial cable can be used to connect port 1 • of XPress-DR+ to a PC’s com port for configuration using a terminal emulation 3 terminal screw connector for power input application.
Page 4
PC Com port to the XPress-DR+ serial port. This cable is Serial Screw Terminal Pinout for RS485 (2-Wire) pinned to provide full serial line control to an RS232 DTE device. Lantronix offers a comprehensive list of cables and adapters to simplify device connectivity to the XPress-DR+.
Q u i c k S t a r t G u i d e XPress-DR+ QUICK CONNECT QUICK CONNECT CONTINUED Typical Installation Warning: Connecting a device to an active Ethernet network can disrupt communications on the network. Make sure the device is configured for your application before connecting it to an active network.
IP your unit has been assigned by the DHCP server and add the unit to the list of Lantronix devices on the network. You have several options for assigning an IP to your XPress-DR+. We recommend...
Status button to clear the window so you can ping the device again. click the Search icon and select the unit from the list of Lantronix device servers Note: If you do not receive "Reply" messages, make sure the unit is properly on the local network.
Page 8
LEDS Step 3: Add the Unit to the Device List Now add the unit to the list of similar Lantronix devices on the network so that you can manage and configure it. To perform this step, click the Search icon DeviceInstaller locates the unit and adds it to the list.
Need help?
Do you have a question about the XPress-DR Plus and is the answer not in the manual?
Questions and answers