Mail Server; Unit Name; Domain Name; Recipient 1 - Lantronix XPort Direct+ User Manual

Mail Server

Enter the IP address of the mail server. Enter each 3-digit section and press Enter
between each section inputted. The current value is displayed in parentheses.

Unit Name

Enter the username used by the XPort Direct+ to send email messages. The current
value is displayed in parentheses.

Domain Name

Enter the email server's domain name. The current value is displayed in parentheses.

Recipient 1

Enter the full email address of the trigger email recipient. The current value is
displayed in parentheses.

Recipient 2

Enter the full email address of the trigger email recipient. The current value is
displayed in parentheses.

Trigger 1

A trigger event occurs when the unit receives the specified trigger input because of a
specified combination of conditions on the configurable pins.
XPort Direct+ User Guide
Trigger input2: X
Trigger input3: X
Message :
Priority: L
Min. notification interval: 1 s
Re-notification interval
Server (0.0.0.0) ? ( 0) _
Mail Server (0.0.0.0) ? ( 0) _
Unit name () ? _
Domain name () ? _
Recipient 1 () ? _
Recipient 2 () ? _
Enable serial trigger input (N) ?
Trigger input1 [A/I/X] (X) ?
8: Setup Mode: Advanced Settings
: 0 s
55