Multi-Room Mode; Operating Pairs Of Speakers In Additional Rooms; Switching The Remote Control To A Pair Of Speakers In Another Room - Grundig RCD 8300 Operating Manual

MULTI-ROOM MODE

1

3







Operating pairs of speakers in additional rooms

You can also use the remote control to operate pairs of loudspeakers in other
rooms. The remote control must be set to the relevant room. If you now enter set-
tings for volume and tone (see the section "Volume and tone" on pages 20 to
22), they will be saved for each room separately.
If you are listening to the same input source, e.g. FM, in a number of rooms and
you select a different radio station, this selection also applies to all the other
rooms in which the FM input source is active. The same applies if, for example,
you select another track in CD mode.
Switching the remote control to a pair of speakers in
another room
You can only select rooms in which loudspeakers are configured. They are
displayed in the »
1
Call up the »
– Display: the »
2
In the »
– Display: the »
3 In the »
sing the buttons.
– The display returns to the Audio menu.
– The room selected is displayed with » «.
______________________________________________
« menu.
« menu by pressing »Audio«.
« menu.
« menu, press »
« menu.
« menu, select the room, e.g. »
3
«.
«, by pres-
49