Table of Contents
Advertisement
INSTALLATION
INSTALL
SECOND PAIR
OF SPEAKERS?
YES
NO
INSTALLATION
INSTALL
WT2 MODULE?
YES
NO
14
INSTALLATION
5
Turn on the left loudspeaker with the mains switch.
– The operation indicator of the loudspeaker first flashes orange, then
green. The left loudspeaker has been detected.
– The remote control display reads: »INSTALLATION
RIGHT SPEAKER«.
6
Turn on the right loudspeaker with the mains switch.
– The operation indicator of the loudspeaker first flashes orange, then the
indicators of both loudspeakers light up green. The right loudspeaker has
been detected.
– The remote control display reads: »INSTALL
SPEAKERS?«.
7
To install a second pair of loudspeakers in room 1, press »YES« on the
remote control. Then repeat steps
or
To end the installation, press »NO« on the remote control.
– The remote control display reads: briefly, »INSTALLATION OF SPEA-
KERS IN CURRENT ROOM COMPLETED«.
– The remote control display then reads: »INSTALL WT2 MODULE?«.
Note:
The WT2 wireless module can only be installed by an authorised dealer in
the FineArts Vision, FineArts Planavision and Lenaro televisions. The autho-
rised dealer will find the relevant information in the mounting instructions
and the operating manual of the WT2 wireless module.
___________________________________________________________________________
SWITCH ON THE
SECOND
and 6.
5
PAIR
OF
Advertisement
Chapters
Table of Contents
