Table of Contents
Advertisement
INSTALLATION
PLEASE CHOOSE
POSITION:
HORIZONTAL
VERTICAL
CANCEL
INSTALLATION
INSTALL
WT2 MODULE?
YES
NO
48
INSTALLING THE WT2 MODULE
5
Select a menu language by pressing one.
– The remote control display reads: »INSTALLATION
POSITION: HORIZONTAL VERTICAL«.
6
Press »HORIZONTAL« or »VERTICAL« to select the future operating mode.
– The remote control display reads: »INSTALLATION
LEFT SPEAKER« (please ignore this message).
7
Press the »RESET« button on the left speaker until the indicator flashes
orange. The display switches to flashing green.
– The left loudspeaker has been detected.
– The remote control display reads: »INSTALLATION
RIGHT SPEAKER« (please ignore this message).
8
Press the »RESET« button on the right speaker until the indicator flashes
orange. The indicators on both speakers switch to green.
– The right loudspeaker has been detected.
– The remote control display reads: »INSTALL
SPEAKERS?«.
9
To install a second pair of loudspeakers in room 1, press »YES« on the
remote control. Then repeat steps
or
To end the installation, press »NO« on the remote control.
– The remote control display reads: »INSTALLATION OF LSP IN ROOM
1 COMPLETED«.
– The remote control display then reads: »INSTALL WT2 MODULE?«.
10
To install the WT2 wireless module, press »YES« on the remote control.
– The remote control display reads: »PLEASE REFER TO THE AUDION
MANUAL«.
_____________________________________________
PLEASE CHOOSE
SWITCH ON THE
SWITCH ON THE
SECOND
and 8.
7
PAIR
OF
Advertisement
Chapters
Table of Contents
