Table of Contents
Advertisement
4
5
6
8
10
6
SET-UP
__________________________________________________________________________________________
Wall mounting
1
Select a suitable mounting location.
1 9 0 m
m
2
Hold the bracket to the selected mounting location and mark the holes.
3
Drill two holes for the screws.
4
Push in the wall plugs and screw in two screws.
5
Cut the lower part of the cable channel to the appropriate length and
screw it (3 screws) to the wall below the position intended for the HiFi
system.
6
Attach the bracket to the bottom of the HiFi system.
7
Connect the mains cable, the FM antenna cable and the DAB antenna
cable, if there is one, to the HiFi system (see page 7).
8
Mount the HiFi system on the two screws by means of the bracket.
9
Feed the mains and antenna cables down through the cable channel.
10
Cut the upper part of the cable channel to the appropriate length and clip
both sides onto the lower part of the cable channel.
11
When wall mounting is complete, align the communication antennae
vertically.
Advertisement
Chapters
Table of Contents
