Grundig RCD 8300 Operating Manual page 116


SETUP M-ROOM
INSTALLATION
WT2
INSTALL WT2
52
INSTALLING THE WT2 MODULE
12 Call up the »AUDIO« menu by pressing »Audio« on the remote control of
the HiFi system.
– Display: the »AUDIO« menu.

13
In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »SETUP« menu.

14
In the »SETUP« menu, press » INSTALLATION«.
– Display: the »INSTALLATION« menu.
15
 In the »INSTALLATION« menu, press » WT2«.
– Display: the »WT2« menu.
16 In the »WT2« menu, press » INSTALL WT2«.

– Display: »PLEASE REFER TO THE INSTALLATION MANUAL«, then
the message: »INSTALLATION OF WT2 COMPLETED«.
– The message »Installation on HiFi system completed« appears on the tele-
vision screen.
17
Press »
– The HiFi system is now in standby mode.
18
To leave the »Loudspeaker wireless module« television menu, press »i« on
the TV remote control.
« (three times) to return to the »AUDIO« menu.
_____________________________________________