Tuner Mode; Selecting The Tuner Input Source; Selecting Presets; Stereo/Mono Reception - Grundig MS 510 Instructions Manual

TUNER MODE

Selecting the tuner input source

1 Press »RADIO« to select TUNER as the input
source.
– T he most recently selected station is played
(Last Station Memory).
– D isplay: » « and the name of the radio sta-
FM
tion or the frequency.

Selecting presets

1 Select the preset by pressing »
Note:
You can also select the preset with the number
7
buttons »1 ... 9«.
For two-digit preset numbers, first press »0«.

Stereo/mono reception

When the hi-fi system receives stereo channels,
» « appears in the display. If the signal from
!
the stereo channel is weak, you can improve the
sound quality by switching to mono reception.
1 Press »STEREO
7
tion.
– D isplay: »MONO« appears briefly and»
disappears.
2 To switch back to stereo reception, press
»STEREO «.
7
– D isplay: »STEREO« appears briefly and
» « appears.
!
Note:
The stereo/mono setting can be stored on
7
each preset.

RDS information

RDS (Radio Data System) is an information sys-
tem which is transmitted additionally by most FM
stations.
When the hi-fi system receives an RDS station,
the station name appears in the display, for ex-
ample: »FANTASY« and »
Notes:
It may take some time before all the RDS
7
information is transmitted.
GRUNDIG has no influence on the correct-
7
ness of this information.
ENGLISH
16
------------------------------------------------------------------------------------------------------------------------
G H
« or »
« to switch to mono recep-
«.
Searching for an RDS station
1 Select the RDS station by pressing »
H
» « repeatedly until an RDS station is received
and »
– I f the reception is strong enough, the station
name appears after a short time.
Displaying RDS station informa-
tion
If the device receives an RDS station, the sta-
«.
tion name appears in the display together with
» «. If no information is available, the re-
ception frequency appears in the display.
Additional information can be displayed.
1 To display information on the current RDS sta-
tion, press »DISPLAY« repeatedly.
– T he following displays are shown one after
the other:
T he current programme type (PTY), e.g. »Pop
music«. »[No PTY]« appears if information is
not available.
The radio text.
The frequency.
«
!
« appears in the display.
G
« or