Multi-Room Mode; Special Features Of Multi-Room Mode; Installing Additional Pairs Of Loudspeakers - Grundig RCD 8300 Operating Manual


SETUP M-ROOM
INSTALLATION
INSTALL LSP
36

MULTI-ROOM MODE

Special features of multi-room mode

In addition to the two pairs of active loudspeakers in room 1 you can operate
up to eight additional pairs of loudspeakers – distributed in different rooms –
with the HiFi system. The various options are described on pages 5 and 6 of the
operating manual.
If you do not want to carry the remote control from room to room in order to set
the input source, volume and tone for the individual pairs of loudspeakers, you
have the option of using more than one remote control (accessories). In this
case, pressing »9« on a remote control only switches the speakers in the
applicable room to standby.

Installing additional pairs of loudspeakers

1
Insert the mains plug of the new active loudspeakers in the socket. If neces-
sary, switch off the loudspeakers with their mains switches.
2 Switch the HiFi system and the existing loudspeakers on from standby mode.
3
Call up the »AUDIO« menu by pressing »Audio« on the remote control.
Display: the »AUDIO« menu.

4
In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »SETUP« menu.
5 In the »SETUP« menu, press »INSTALLATION«.

– Display: the »INSTALLATION« menu.
6 In the »INSTALLATION« menu, press »LSP«.
– Display: the »LSP« menu.

7
In the »LSP« menu, press »INSTALL LSP«.
– Display: the »INSTALL LSP« menu with »ROOM 1« to »ROOM 9«.
______________________________________________