Grundig RCD 8300 Operating Manual page 39

CD MODE

II

5
  
____________________________________________________________________________________
Note:
The track playing time elapsed which is displayed on the remote control
is approx. 3 seconds behind that on the HiFi system. This is caused by the
normal delay in the transmission of radio data signals and has nothing to do
with technical faults.
If the CD provides CD text, instead of the elapsed playing time you will see
the name of the track in the remote control menu, (see the section "calling up
CD text information".)
Press » « to call up further information.
2
Use »II« to switch to playback pause.
– Display: »II« (pause) changes to »
Press » R « to resume playback.
3
Press » « to end playback.
5
Calling up CD text information
If it is available, CD text provides information about the artist, the composer, etc.
1
In the » « menu, press »
– Display: the »
2
Use » « or » « to move the text up or down.
c x
3 Press » « to switch to the next information available.
4
If all the available information has been displayed, press »
the » « main menu.
« (playback).
R
«.
« menu.
« to return to
39