Technical Data - Grundig RCD 8300 Operating Manual

Fine arts audion wireless hifi system
Hide thumbs Also See for RCD 8300:
Table of Contents

Advertisement

INFORMATION

Technical data

This device is noise-suppressed
according to the applicable EC
directives.
This product fulfils the European
directives 89/336/EEC, 73/23/
EEC and 93/68/EEC.
This device conforms to the safety
DFM 869
regulation DIN EN 60065 (VDE
AFM 864
0860) and therefore the internatio-
nal safety regulation IEC 60065.
The type plate with details on the
mains supply is located on the
bottom of the device.
The HiFi system and the remote control are intended for sale within the EU in the following countries: Belgium,
Denmark, Germany, UK, Finland, France, Ireland, Italy, Luxembourg, Netherlands, Norway, Austria, Portugal,
Sweden.
General instructions for laser devices
__________________________________________________________________________
Transmission range
Data transmission:
868 ... 870 MHz
Signal transmission:
863 ... 865 MHz
Transmission power:
< 10 mW
Amplifier unit
Input sensitivity /
impedance:
250 mV/22 kΩ
Receiver unit
Reception range:
FM 87.5 ...108.0 MHz
This device meets the requirements for a CLASS 1 LASER PRODUCT.
CLASS 1 LASER PRODUCT means that the laser is designed in such a way as to
ensure that the maximum permissible emission value cannot be exceeded under
any circumstances.
If operating devices or methods other than those specified here are employed, it
may lead to dangerous exposure to emissions.
Invisible laser radiation is emitted if the CD compartment is opened and the
safety locking mechanism is shorted. Do not expose yourself to this radiation.
CD unit
Frequency response:
10 Hz ... 20 kHz
Non-linear distortion factor:
0.01 %
Noise-voltage ratio:
(wtd.) 100 dB
System
Power supply:
Operating voltage 230 V~
Mains frequency 50/60 Hz
Max. power consumption 29 W
Power consumption in
standby < 3 W
Dimensions and weight:
Device dimensions
W x H x L 310 x 100 x 325 mm
Weight 4.8 kg
63

Advertisement

Table of Contents
loading

Table of Contents