Setting The Time And Date - Grundig RCD 8300 Operating Manual

SETUP SETTINGS
 
SETUP M-ROOM

LANGUAGE

FRANCAIS
TIME/DATE
24.09.2002
  
1 2 3
  
4 5 6
  
7 8 9
 
TIME 0

OFF
RDS UPD.
 
END
________________________________________________________________________
3 In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »SETUP« menu.
4
In the »SETUP« menu, press »LANGUAGE«.
– Display: the »LANGUAGE« menu.
5
In the »LANGUAGE« menu, select a language.
– The setting is saved automatically.
– The display returns to the »SETUP« menu.
Note:
If you are using a number of remote controls you have to set the language
on each remote control separately. The last language selected is valid for the
HiFi system.

Setting the time and date

1
Switch the HiFi system and the loudspeakers on from standby mode.
2
Call up the »AUDIO« menu by pressing »Audio« on the remote control.
– Display: the »AUDIO« menu.
3
In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »SETUP« menu.
4
In the »SETUP« menu, press »TIME/DATE«.
– Display: the »TIME/DATE« menu with a numeric keypad.
5 In the »TIME/DATE« menu, press »TIME« and enter the time with the
numeric buttons.
– Display: the »TIME« button disappears and the »DATE« button appears.
6
Press »DATE« and enter the date with the numeric buttons.
– Display: the »DATE« button disappears and the »TIME« button appears.
31