Other Remote Control Operating Modes - Grundig RCD 8300 Operating Manual

52
INFORMATION

Other remote control operating modes

In addition to your HiFi system, you can also use your PR 1 remote control to
operate other Grundig devices such as TV, DVD, video and PDR.
If the remote control is in HiFi mode, press the »Vision« button (hard key) to
switch to the »
ton (soft key) to select the TV, DVD, video or PDR mode. To return to HiFi mode,
press the »Audio« button (hard key).
The remote control in TV mode
9
Display
Audio
Vision
P + P–
OK
__________________________________________________________________________
« menu. In the »
Switches the television into and out of standby mode.
Display of the remote control and digital keypad (touchpad). If
the keypad is not used for 30 seconds, the display switches off
automatically. To switch it on again, press the »OK« key (hard
key) on the remote control.
Selects the HiFi mode (FineArts Audion).
Selects the television mode. Selects other operating modes such
as DVD and video (see pages 53 to 60).
Switch the television on from standby. Select channels step-by-step.
Move the cursor up/down.
Switches the remote control display on.
Confirms menu entries.
Calls up the program list.
Move the cursor to the left or right.
« menu, press the relevant but-