The Remote Control - Grundig RCD 8300 Operating Manual

OVERVIEW
__________________________________________________________________________________

The remote control

9
Display
Audio
Vision
P + P –
OK
Switches the HiFi system to and from standby mode.
In multi-room mode: switches only the loudspeakers in the current
room to standby. Hold down to switch the whole system to standby.
Display of the remote control and digital keypad (touchpad with
soft keys): guides the user through the operation and installation of
the system.
In FM, DAB and CD mode, it shows the relevant controls (soft keys)
and information.
If the keypad is not used for 30 seconds, the display switches off
automatically. To switch it on again, press the »OK« key (hard key)
on the remote control.
Selects the HiFi mode (FineArts Audion). Switches the remote con-
trol on with the » « menu.
Selects the television mode (FineArts Vision). Selects other Vision
operating modes such as DVD and video (see pages 52 to 60).
In FM and DAB mode: selects the station positions in steps.
In CD mode: selects the previous or following CD track.
Switches the remote control display on.
Confirms the menu entries (primarily in Vision mode).
In FM or DAB mode: changes the FM frequency or the DAB station
positions in steps. Hold down to start the automatic search.
In CD mode: press briefly for the next or previous track. Hold down
to search for a particular passage.
13