Sleep Timer Mode - Grundig RCD 8300 Operating Manual





48

SLEEP TIMER MODE

With the "Sleep timer" function you can enter a separate switch-off time for
every room installed. At the time entered, each pair of loudspeakers switches to
standby mode. When the last pair of loudspeakers switches off, the HiFi system
also switches to standby mode.
Setting the switch-off time

1
Press »
– The »
2
In the »
from 10 to 90 minutes) with » « or » «.
– If you do not press any button for more than 5 seconds, the remote control
display returns to the previous menu.
– At the switch-off time selected, the loudspeakers in the room selected switch
to standby mode.
Note:
If the sleep timer is activated, press »
ning before switching off.
If the touch pad display of the remote control is activated while the sleep
timer is running, »
briefly in the remote control display.

Ending the sleep timer prematurely
1
Press »
– The »
2
In the »
– The sleep timer is deactivated.
« (yellow).
M
« menu appears.
« menu, enter the switch-off time desired (in 10-minute steps
« (yellow).
M
« menu appears.
« menu, enter the switch-off time 0 with » «.
_________________________________________________
« (yellow) to see the time remai-
M
« and the time selected appear