Switching The Hifi System To Horizontal Or Vertical Mode; Resetting The Menu Language - Grundig RCD 8300 Operating Manual


SETUP M-ROOM
INSTALLATION
POSITION
VERTICAL
30
SETUP SETTINGS
Switching the HiFi system to horizontal or vertical
mode
1
Switch the HiFi system and the loudspeakers on from standby mode.
2 Call up the »AUDIO« menu by pressing »Audio« on the remote control.
– Display: the »AUDIO« menu.

3 In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »SETUP« menu.

4
In the »SETUP« menu, press »INSTALLATION«.
– Display: the »INSTALLATION« menu.
5
In the »INSTALLATION« menu, press »POSITION«.

– Display: the »INSTALLATION« (Position) menu.
6
In the »INSTALLATION« (Position) menu, press »HORIZONTAL« or

»VERTICAL«.
7
Press »

Resetting the menu language

The menu language is set during the first installation of the system, but it can
also be changed at a later date.
1
Switch the HiFi system and the loudspeakers on from standby mode.
2
Call up the »AUDIO« menu by pressing »Audio« on the remote control.
– Display: the »AUDIO« menu.
________________________________________________________________________
« to return to the »SETUP« menu.