Switching On And Off; Eco Mode; Automatic Switch-Off; Adjusting The Volume - Grundig M 2200 Manual

GENERAL­FUNCTIONS
Switching­on­and­off
The only way to disconnect the hi-fi system from
the mains supply is to pull out the plug.
1 Switch on the hi-fi by pressing »
»SOURCE« on the device.
– T he last input source used is automatically
selected.
Note:
The hi-fi system can also be switched on by
7
pressing »FM/DAB«, »
»AUX« on the remote control.
2 Switch the hi-fi system to standby mode by
pressing » 8 «.
ECO­mode
To reduce the power consumption to less than
0.5 W, the hi-fi system is switching during stand-
by into ECO mode.
In ECO mode, the time display disappears; it can
be displayed by pressing »
1 In ECO mode, press »
– T he clock time can be displayed 90 sec-
onds.
2 In ECO mode, long press »
seconds.
– T he unit will be switched to standby mode
and clock time will be displayed meanwhile.
– T he Unit will enter ECO mode again after 15
minutes.
Automatic­switch-off
The device switches off automatically after 15
minutes in standby mode if:
– the device is in the stop position;
– t here is no audio signal detected at the
»AUX­IN« socket;
– t here is no plug connected to the
»AUDIO­IN« socket;
– t he Bluetooth auxiliary devices is not sending
an audio signal.
To use the device, switch it back on.
Adjusting­the­volume
1 Press » VOLUME« on the hi-fi or »– VOL­+«
on the remote control to change the volume.
8 « or
«, »CD«, »USB« or
¥
«.
¥
« button one time
8 « button about 2
­---------------------------------------------------------------------------------------
Selecting­sound­settings
You can choose between preset sound settings.
1 Select the sound setting using »DSC« on the
remote control.
Changing­the­bass­or­treble
1 Change the bass using » – BASS­+« on the
remote control.
2 Change the treble using » – TREBLE­+« on the
remote control.

Loudness

The loudness function provides better sound at
lower audio volumes.
1 Switch loudness on and off using »
« on the remote control.
NESS
Note:
If you select a sound setting, this cancels
7
your adjustment of the bass, treble or loud-
ness.

Muting

You can switch the hi-fi speakers to and from
mute mode with this function.
1 Activate mute with » « on the remote control.
2 Deactivate mute with » « on the remote con-
trol.
Displaying­the­time­
1 Display the time with »
trol.
2 Switch off the time with »
control.
Setting­the­brightness­of­the­dis-
play
1 Adjust the brightness of the display (3 stages)
R
with » « on the remote control.
LOUD-
¥
« on the remote con-
¥
« on the remote
15­
ENGLISH