Grundig RCD 8300 Operating Manual page 118

INSTALL ERROR MUTE
B A

SETUP M-ROOM
INSTALLATION
WT2
54
INSTALLING THE WT2 MODULE
6 Press the »RESET« button on the left rear speaker until the indicator flashes
orange. The display switches to flashing green.
– The »INSTALL« indicator on the WT2 flashes green/orange, and the
»A«, and »9« indicators light up red.
– The left loudspeaker has been detected.
7
Press the »RESET« button on the right rear speaker until the indicator chan-
ges from green to orange.
– The »INSTALL« and »A« indicators on the WT2 switch off, and the »9«
indicator lights up red.
– The right loudspeaker has been detected.
– The indicators on both loudspeakers light up green.
– You will hear the sound from the television.
8
Call up the »AUDIO« menu by pressing »Audio« on the remote control.
– Display: the »AUDIO« menu.

9
In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »SETUP« menu.

10
In the »SETUP« menu, press » INSTALLATION«.
– Display: the »INSTALLATION« menu.

11
In the »INSTALLATION« menu, press » WT2«.
– Display: the »WT2« menu.
_____________________________________________