Deleting Additional Remote Controls; Replacing Loudspeakers - Grundig RCD 8300 Operating Manual

MULTI-ROOM MODE

INSTALLATION

PR1

DELETE PR1

32

DELETE

Deleting additional remote controls

The HiFi system must be switched on for the data transmission to be carried out.
The display of the remote control you want to delete must have switched itself off.
1
Call up the »AUDIO« menu by pressing »Audio« on the remote control
you want to delete.
– Display: the »AUDIO« menu.
2
In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »SETUP« menu.
3 In the »SETUP« menu, press » INSTALLATION«.
– Display: the »INSTALLATION« menu.
4 In the »INSTALLATION« menu, press » P R 1 «.
– Display: the »PR1« menu.
5
In the »PR1« menu, press » D E L E T E PR1«.
– Display: the » D E L E T E PR1« menu with the identification numbers of all
the installed remote controls.
6
To select the remote control, press the button with the relevant identification
number, e.g. » 32«.
– Display: » "DELETE" WILL REMOVE THE SELECTED PR1«.
7
To delete the remote control, press »DELETE«.
– Display: » P R 1 DELETED«.

Replacing loudspeakers

If you want to replace loudspeakers that are installed on the HiFi, you must
install the new loudspeaker.
________________________________________________________________
41