Volume And Tone; Adjusting The Volume; Adjusting The Treble, Bass, Balance And Fader - Grundig RCD 8300 Operating Manual

I





20

VOLUME AND TONE

You can enter the volume, bass, treble and balance settings separately for the
loudspeakers in room 1 (and for other pairs of speakers in multi-room mode).
The loudspeakers in room 1 must be in the same room as the HiFi system.

Adjusting the volume

1 Adjust the volume with »
– Display: »
Note:
If you change the volume using »+« or »–« on the HiFi system, this only
affects the loudspeakers in room 1.

Adjusting the treble, bass, balance and fader

Note:
1
The »
selected the »
»

and the remote control is set to this room (see the relevant section on page 49).

1 Call up the »

2
In the »
3
Adjust the treble, bass or balance with » « or » «.
– The setting is saved automatically.
« or »
– }
« and the value (from » « to »
« and » « settings are only available if you previously
« (user-defined) sound setting.
« only appears if two pairs of loudspeakers are installed in room 1
« menu by pressing the »
« menu, call up the »
_____________________________________________
«.
} +
«).
F
« (blue) button.
«, » « or » « setting.