Grundig RCD 8300 Operating Manual page 76

12
INSTALLATION
2 Switch on both loudspeakers with their mains switches.
– The operation indicators on the loudspeakers flash orange, i.e. they are at
their original settings.
230V
50/60Hz
Note:
If the indicators do not flash, press the »RESET« button on the bottom of the
loudspeaker casing (LSP2) or on the back (LSP3) with an implement such as
a paper clip.
You can press »RESET« for a longer period of time if the loudspeakers were
at the original settings and were not yet installed on the WT2 wireless module.
If the loudspeakers are already installed on WT2, you do not have to press
»RESET«.
3 Switch off both loudspeakers with their mains switches again.
___________________________________________________________________________