Second Pair Of Speakers; Connecting And Installing A Second Pair Of Speakers (Room 1) - Grundig RCD 8300 Operating Manual

SECOND PAIR OF SPEAKERS


INSTALL LSP

ROOM 1

YES
Connecting and installing a second pair of speakers
(room 1)
Operation with two pairs of loudspeakers is only possible in room 1. You must
have installed one pair of loudspeakers and one remote control on the HiFi
system.
1
Insert the mains plug of the new active loudspeakers in the socket. If neces-
sary, switch off the loudspeakers with their mains switches.
2
Switch the HiFi system and the existing loudspeakers on from standby mode.
3
Call up the »AUDIO« menu by pressing »Audio« on the remote control.
Display: the »AUDIO« menu.
4
In the »AUDIO« menu, press »SETUP« and enter the PIN.
– Display: the »
5
In the »SETUP« menu, press »INSTALLATION«.
– Display: the »INSTALLATION« menu.
6 In the »INSTALLATION« menu, press »LSP«.
– Display: the »LSP« menu.
7
In the »LSP« menu, press »INSTALL LSP«.
– Display: the »INSTALL LSP« menu.
8
In the »INSTALL LSP« menu, press »ROOM 1«.
– Display: »INSTALL SECOND PAIR OF SPEAKERS?«.
9
Press »YES« to continue.
– Display: »SWITCH ON THE LEFT SPEAKER«.
« menu.
SETUP
________________________
33