Switching On From Standby; Selecting The Input Source - Grundig RCD 8300 Operating Manual

18
GENERAL FUNCTIONS

Switching on from standby...

Note:
Your HiFi system is equipped with a volume limit. This restricts the volume to
a value of 25 when you switch it on.
... with the »
This function only applies to the room for which the remote control is set (see
also page 49).
1 Switch the HiFi system on from standby mode by pressing »9«.
– This automatically switches on the loudspeakers.
– You hear the last input source that was selected.
... with the input source buttons
1
Call up the Audio menu with »Audio«.

2 In the »
input source.
... with the CD function
1 Touch the »
– The HiFi system switches on with the CD input source and the CD compart-
ment opens.

Selecting the input source

1
Call up the Audio menu with »Audio«.

2
In the »
input source.
______________________________________________________________
9
« button
« menu, select the »
« sensor button on the HiFi system.
å
« menu, select the »
«, » « or »
«, » « or »
«
«